ETC Express 48/96 - Recording a Group in Stage; Recording a Group from a Look on Stage

130 Chapter 11 Groups
Recording a group in Stage
The following example illustrates the creation of a group using newly
selected channels.
Recording a group from a look on stage
To create a group from the look that’s already on stage, follow these
steps.
Keystrokes: Action:
1. Press [Stage]. Selects the Stage display
2. Press [1] [Thru] [5] [Full]
[And] [8] [And] [1][0] [At] [5]
[Enter].
Select channels and set levels
3. Press [Record] [Group]. Prompt reads:
To record group, select number and
press ENTER
4. Press [1]. Selects group 1 to record
5. Press [Enter]. Records group 1
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [Record] [Group]. Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
3. Press [2]. Enters the group number you want to
record
Corner reads: Group 2
4. Press [Enter]. Records group 2