324 Appendix A Installation
Installing remote macros
The console provides four remote macro inputs through the 15-pin
connector on the back panel labeled Remote Macro. A user-supplied
remote device connects to the console via a 24 AWG, aluminum-shielded,
multi-conductor cable with one twisted pair designated for each switch
(Belden 9507 S-R PCV Insulated or Alpha 5477 80 Deg. C 300 V PVC). The
cable connector at the remote device will vary depending on the device
itself.
Console connector Remote connector
DB-15 female Connector type depends on unit
Pin Function
1 +Macro 1,901
2 –Macro 1,901
3 +Macro 1,902
4 –Macro 1,902
5 +Macro 1,903
6 –Macro 1,903
7 +Macro 1,904
8 –Macro 1,904
9 Remote Trigger - normally closed (30V 1 amp max)
10 Remote Trigger - normally open (30V 1 amp max)
11 Remote Trigger - common (30V 1 amp max)
12 Ground
13 Ground
14 + 12 Vdc fused
15 + 12 Vdc fused
To Next Page
Loading...
