Express Two Scene Preset User Manual, v.3.1 241
Moving a link
Use [S7], Move Link, to renumber a link or a group of links. All links in a
group will be renumbered sequentially.
To move a link to an empty space on the Link List, follow these steps:
Merging two links
If you move a link to a space on the Link List which already contains a link,
the channels in the moved link are added to the existing link.
To move a link to an occupied space on the Link List, follow these steps:
Note: To split a link apart, create a new link with the channels you want to
move. Since a channel can only be in one link at a time, it will be deleted
from the original link and recorded in the new link.
Keystrokes:
Action:
1. Press [Setup] [1][1] [Enter].
Selects Channel Attributes display
2. Press [S7], Link List.
Selects Link List display
Prompt reads:
Select link number
3. Press [S7], Move Link.
Prompt reads:
Select link number(s) to move, then
press ENTER
To cancel, press CLEAR.
4. Press [6] [Enter].
Prompt reads:
To move selected link(s), select
target link and press ENTER
To cancel, press CLEAR
5. Press [9] [Enter].
Link 6 is renumbered as link 9
Keystrokes:
Action:
1. Press [Setup] [1][1] [Enter].
Selects Channel Attributes display
2. Press [S7], Link List.
Selects Link List display
Prompt reads:
Select link number
3. Press [S7], Move Link.
Prompt reads:
Select link number(s) to move, then
press ENTER
To cancel, press CLEAR.
4. Press [6] [Enter].
Prompt reads:
To move selected link(s), select
target link and press ENTER
To cancel, press CLEAR
5. Press [7] [Enter].
Prompt reads:
Link already exists –
To confirm, press ENTER
To cancel, press CLEAR
6. Press [Enter].
The channels in link 6 are added to the
channels in link 7
To Next Page
Loading...
