186 Chapter 14 Lists and spreadsheets
Focus point spreadsheet
Go to the focus point spreadsheet as follows.
Creating focus points
After entering the focus point spreadsheet as explained above, create a
focus point as follows.
Keystrokes: Actions:
1. Press [Blind] [Focus Point]
[Enter].
Selects the focus point mode of the
blind display
2. Press [S3], Spreadsheet.
Shows the focus point spreadsheet
Keystrokes: Actions:
1. Press [S2], Create Focus.
Prompt reads:
To create a new focus point, select
focus point number and press
ENTER
To cancel, press CLEAR
2. Press [5] [Enter].
Selects focus point 5
Prompt reads:
Select channel(s)
3. Press [5] [Thru] [1][0].
Selects channels to include
Prompt reads:
Enter intensity
4. Press [Full].
Sets channels 5 through 10 to full
5. Repeat steps 3-4.
Continue selecting channels and
setting levels until done
To Next Page
Loading...
