Express Two Scene Preset User Manual, v.3.1 127
Quickstep
Quickstep allows you to run through a show, checking all cues, without
having to wait for fades. When Quickstep is active, the faders ignore all
upfade, downfade, follow, and wait times. Cues snap immediately to their
completed levels when you press [Go] or [Back].
To enable Quickstep and run a cue check, follow these steps:
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display
2. Press [S7], More
Softkeys, [S1], Enable
Quickstep.
Turns on Quickstep
3. Press [Cue] [1].
Selects cue 1
4. Press [Go].
Cue 1 comes up on stage instantly
5. Continue to press [Go]
until you have checked all
cues.
Each cue comes up on stage instantly
6. Once you are finished,
press [S1], Disable
Quickstep.
Turns off Quickstep; fades will operate
normally
To Next Page
Loading...
