Express Two Scene Preset User Manual, v.3.1 95
Modifying cue attributes
If all you want to do is modify a cue attribute, such as cue timing, you can
do that in Stage without first playing back the cue. Use the procedure
below to modify cue attributes.
Keystrokes: Action:
1. Press [Stage] or [Blind]. Selects display mode
2. Press [Cue] then enter the
number of the desired cue.
Selects the desired cue
3. Press the key that
corresponds to the
attribute you want to
modify. Options include:
Type, Time, Wait, Link and
Follow.
4. Enter the new setting for
the attribute.
Modifies cue attribute
5. Press [Enter].
a
a. Note that if you change the cue’s type, press [Record] [Enter]
in step 5. Type changes will not take effect unless recorded.
Re-records cue with modifications
To Next Page
Loading...
