ETC Express 48/96 - Park

Express Two Scene Preset User Manual, v.3.1 175
Deleting submasters
All recorded information can be removed for one or more submasters
using the Submaster List. Follow the procedure below.
7. Press [5] [Enter]. Specifies 5 second downfade time
Prompt reads:
Select submaster type
(1=Pile-on, 2=Inhibitive, 3=Effect)
8. Press [2] [Enter]. Specifies inhibitive type. Prompt reads:
Use keypad to select submaster rate
(0-2000, 100=Normal)
9. Press [2][0][0] [Enter].
a
a.
You cannot gain access to the label field from the console. In
Expression Off-Line, type the keyboard equivalent “B” here
instead of [Enter] to produce the prompt shown in Step 9 and
to enter the label field.
Specifies rate 200. Prompt reads:
Select submaster numberType
submaster label
(F6=clear to end,
F7=previous submaster level,
F8=next submaster label)
10. Enter your label on the
keypad, then press [Enter].
Labels submaster 23
Keystrokes:
Action:
1. Press [Blind] [Sub] [S2],
Sub List.
Displays Submaster List. Prompt reads:
Select submaster number(s)
2. Press [S6], Delete Sub. Prompt reads:
Top delete submaster(s), select
number(s) and press ENTER
to cancel, press CLEAR
3. Press [5][And][7] [Enter].
Specifies submasters 5 and 7 to be
deleted. Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
4. Press [Enter].
Deletes submasters 5 and 7