Express Two Scene Preset User Manual, v.3.1 263
Chapter 24
Dimmer monitoring
ETC consoles may be connected to ETC Sensor dimming systems via the
ETCLink communication protocol. In this configuration, the console
operates a dimmer monitoring system that provides you with a wide
range of dimmer status information, including overall dimming system
status and specific information about individual dimmer modules and
dimmer racks.
Your window on ETCLink is through the ETCLink Functions menu.
Most of the dimmer, rack and dimming system information provided
by console displays is also provided by the the Control Electronics
Module (CEM) of your Sensor dimming system.
Consult this chapter for information on the following topics:
• Enabling ETCLink
• Enabling / disabling ETCLink error messages
• Recording, checking and clearing dimmer loads
• Examining overall dimming system status
• Examining rack status
• Examining dimmer status
• Setting / unsetting dimmers with ETCLink
• Using Sensor backup looks
To Next Page
Loading...
