124 Chapter 10 Playing back cues
Playing a cue
Selecting a cue moves it to the top of the Cue List. It will not run until you
press [Go]. Follow these steps to select a cue and play it on the fader of
your choice.
Go to a different cue
To play back a cue other than the cue highlighted on the Cue List, follow
these steps:
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [Cue].
Prompt reads:
Select cue number
To select cue type, press TYPE
3. Press [1][.][5].
Selects cue 1.5 to play. Cue List
moves cue 1.5 to the top of the list
4. Press [Go] on fader A/B.
Cue 1.5 runs on fader A/B; Cue 2
moves to the top of the Cue List
5. Press [Go] on fader C/D.
Cue 2 starts to run on fader C/D
Keystrokes:
Action:
1. Press [Stage].
Selects Stage mode display
2. Press [Cue] [2].
Selects cue 2
3. Press [Go].
Runs cue 2
To Next Page
Loading...
