Express Two Scene Preset User Manual, v.3.1 29
Record lockout
You may set the console to disable the Record function. This protects a
finished show from inadvertent changes.
9
To disable the Record function in your system, follow these steps:
Enable / disable bump buttons
The console’s submaster bump buttons (also known as bump keys) may
be enabled or disabled. The default condition is enabled.
Follow these steps to enable or disable all submaster bump buttons:
9.
As always, the best way to safeguard your show is to make backups. See Chapter
20 Diskette functions, page 243, for instructions on backing up a show to diskette.
Keystrokes: Action:
1. Press [Setup]. Selects Setup display
2. Press [1], System
Settings, [Enter].
Selects System Settings menu.
Menu indicates current status of
Record Lockout
3. Press [1][3], Record
Lockout, [Enter].
Prompt reads:
Enable/Disable record lockout
(1 = Enable, 0 = Disable)
4. Press [1] to lock out the
record function.
Record is locked out. If you
attempt to record anything, the
prompt reads:
Record is locked out
(Press CLEAR to continue)
Keystrokes: Action:
1. Press [Setup]. Selects Setup display
2. Select [1], System
Settings, and press
[Enter].
Selects System Settings menu
3. Select [1][4], Bump keys,
and press [Enter].
Prompt reads:
Enable/disable bump keys
(1 = Enable, 0 = Disable)
4. Press [1] or [0]. Corner reads:
BpStat 1
Or...
BpStat 0
5. Press [Enter]. Submaster bump buttons are
enabled or disabled
To Next Page
Loading...
