262 Chapter 23 Two scene preset
Timed crossfades
Use the A/B fader controls to run a timed crossfade from one scene to the
other.
Pause a timed crossfade
Press [A/B Hold] to pause a running timed crossfade. Press [A/B Go] to
resume the timed fades.
Keystrokes: Action:
1. Set up the new scene on
the channel sliders.
Selects Channel Attributes
display
2. Press [A/B Rate]. Prompt reads:
Select scene upfade time, then
press ENTER
3. Press [2][0] [Enter]. Prompt reads:
Select scene downfade time,
then press ENTER
4. Press [3][0] [Enter]. The Scene fade status display
indicates time settings on the
bottom line
5. Slide both faders to the
opposite end. As soon as
they reach their new posi-
tions, the fades start.
The new scene fades up in 20
seconds. The old scene fades
out in 30 seconds
To Next Page
Loading...
