EasyManua.ls Logo

ETC Express 48/96 - Deleting a Link; Using a Link

ETC Express 48/96
386 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
242 Chapter 19 Link lists
Deleting a link
Use [S6], Delete Link, to remove a link from the Link List. All subsequent
links will be renumbered.
To delete a link, follow these steps:
Using a link
Once you have linked the color control channels for the two color
scrollers, the console allows you to control them simultaneously on the
trackpad. If you move in just the X or Y direction only, the color will change
only on the corresponding scroller.
To control the scrollers, follow these steps:
Keystrokes: Action:
1. Press [Setup] [1][1] [Enter]. Selects Channel Attributes display
2. Press [S7], Link List. Selects Link List display
Prompt reads:
Select link number
3. Press [S6], Delete Link. Prompt reads:
Select link number(s) to delete,
then press ENTER
(Enter 0 to delete all links)
4. Press [5] [Enter]. Prompt reads:
To confirm, press ENTER
To cancel, press CLEAR
5. Press [Enter]. The link is deleted from the Link List.
All links with higher numbers are
renumbered one lower
Keystrokes: Action:
1. Press [Stage]. Selects Stage display
2. Press [1]. Selects channel 1. Channel number is
gold, signifying that it is assigned to the
X list. Through the link, selects channel
11. Channel number is yellow,
signifying that it is assigned to the Y list
3. Place your finger in the
lower left corner of the
trackpad and slowly move
it toward the upper right
corner.
The levels on both channels rise
together, each controlled by an axis of
the trackpad. As they do, the colors
change on the color scrollers,
corresponding to the levels. Both axis
levels are displayed in the prompt
corner

Table of Contents

Other manuals for ETC Express 48/96

Related product manuals