ETC Express 48/96 - Working with Groups in Stage; Displaying a Group; Modifying a Group

Express Two Scene Preset User Manual, v.3.1 133
Working with groups in Stage
Displaying a group
To view a recorded group on stage, follow these steps:
Modifying a group
Follow the procedure below to modify a recorded group in Stage and then
record the modifications into the same group or into a different group.
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [Group] [2]. Selects group 2
Prompt reads:
Group mode – Select group number
to use as group
3. Press [Full]. Prompt reads:
Group mode – Press AT or use wheel
or trackpad to alter levels, or select
channel numbers to edit
Keystrokes:
Action:
1. Display the group on stage
as illustrated above.
2. Select channels you want
to modify and adjust
channel levels.
Alters look
3. Press [Record] [Group].
Prompt reads:
To record group, select number and
press ENTER
To cancel, press CLEAR
4. Press [Enter].
a
a. Record the modifications into a different group by pressing
the other group’s number before you press [Enter] in this
step.
Records modifications into the group