148 Chapter 12 Focus points
Labeling focus points
If you have Expression Off-Line, you may assign labels to your focus
points.
65
Focus point labels can consist of any combination of letters,
numbers and symbols and may be up to 16 characters long.
Follow these steps to label a focus point:
65.
For information about Expression Off-Line and how to order it, see Expression Off-
Line, page 312.
Keystrokes:
Action:
1. Press [Blind].
Selects Blind display mode
2. Press [Focus Point] [1].
Prompt reads:
Group mode – To recall a focus
point, select the number and set it
to a level
To create or modify a focus point,
select the number and press ENTER
3. Press [Enter].
Prompt reads:
Select channel numbers
4. Press [Label].
a
a. Not available on the Express console. You may type keyboard
equivalent “B” in Expression Off-Line as a substitute for the
Label key.
Prompt reads:
Type focus point label
(F6 = clear to end,
F7 = previous focus point label,
F8 = next focus point label)
5. Use the alphanumeric
keyboard to enter a label.
Corner displays your label
6. Press [Enter].
Focus point 1 is labeled
To Next Page
Loading...
