ETC Express 48/96 - Parking channels; Parking at a focus point

178 Chapter 14 Lists and spreadsheets
Labeling a focus point
If you have Expression Off Line, follow this procedure to label a focus
point in the Focus Point List display.
81
Deleting a focus point
Follow this procedure to delete one or more focus points in the Focus
Point List display.
Keystrokes:
Action:
1. Press [Blind] [Focus Point]
[Enter] [S2], Focus List.
Displays Focus Point List
Prompt reads:
Select focus point number(s)
2. Press [4] [B]. Selects focus point 4
Prompt reads:
Type focus point label
(F6=clear to end,
F7=previous focus point level,
F8=next focus point label)
3. Enter your label, then
press [Enter].
Completes labeling of focus point 4
81.
See Expression Off-Line, page 312, for more information about this program.
Keystrokes:
Action:
1. Press [Blind] [Focus Point]
[Enter] [S2], Focus List.
Displays Focus Point List
Prompt reads:
Select focus point number(s)
2. Press [S6], Delete Focus. Prompt reads:
To delete focus point(s), press
number(s) and press ENTER
To cancel, press CLEAR
3. Press [4] [And] [5] [Enter]
[Enter].
Deletes focus points 4 and 5
Prompt reads:
Select focus point numbers(s)