ETC Express 48/96 - Macro wait

Express Two Scene Preset User Manual, v.3.1 215
Changing upfade, dwell and downfade
Follow these steps to change the effect’s fade times:
Changing upfade only
Follow these steps to change only the effect’s upfade time:
Changing downfade only
Follow these steps to change only the effect’s downfade time:
Keystrokes: Action:
1. Press [Blind] [Cue] [2]. Selects cue 2 in the Blind display
2. Press [Time] and enter the
upfade time.
Prompt reads:
Enter effect upfade time
3. Press [Time] and enter the
dwell time.
Prompt reads:
Enter effect dwell time
4. Press [Time] and enter the
downfade time. Press
[Clear] for hold dwell.
Prompt reads:
Enter effect downfade time
5. Press [Enter]. Fade time entry is complete Prompt
reads:
Select step numbers
Keystrokes: Action:
1. Press [Blind] [Cue] [2]. Selects cue 2 in the Blind display
2. Press [Time]. Prompt reads:
Enter effect upfade time
3. Enter the upfade time. Prompt reads:
Enter effect upfade time
4. Press [Enter] [Enter]
[Enter].
Prompt reads:
Select step numbers
Keystrokes:
Action:
1. Press [Blind] [Cue] [2].
Selects cue 2 in the Blind display
2. Press [Time] [Time] [Time].
Prompt reads:
Enter effect downfade time
3. Enter the downfade time.
Prompt reads:
Enter effect downfade time
4. Press [Enter].
Prompt reads:
Select step numbers