222 Chapter 17 Subroutines
Creating subroutines
Create subroutines in the Blind display. A subroutine can have up to 100
steps. Each step lists a cue or a style.
To create a subroutine, follow these steps:
Keystrokes:
Action:
1. Create the cues you want
to use in your subroutine.
2. Press [Blind].
Displays Blind mode screen
3. Press [Cue] [7].
Selects cue 7
4. Press [Type].
Displays fade type menu
Prompt reads:
Select fade type
(1 = Crossfade, 2 = Allfade,
3 = Effect, 4 = Subroutine or
5=Blocking)
5. Press [4], Subroutine.
Select subroutine fade type
Prompt reads:
Select step number(s), then press
ENTER
6. Press [1] [→].
Selects step 1. Prompt reads:
Enter cue number to fade, or press
STYLE to change step type
7. Press [1] [
→
].
Selects cue 1 for step 1
Prompt reads:
Enter type of cue
(1 = Crossfade, 2 = Allfade,
3 = Blocking)
8. Press [1].
Designates cue as a crossfade within
the subroutine. Prompt reads:
Enter intensity
9. Press [5][5].
Selects a level of 55 percent for the
cue within the subroutine
Prompt reads:
Enter upfade time
10. Press [8] [→].
Sets an upfade time of 8 seconds
Prompt reads:
Enter downfade time
11. Press [→].
Sets a downfade time of 8 seconds
Prompt reads:
Enter follow time
12. Press [2][0].
Sets a follow time of 20 seconds. Step
1 is now complete
13. Press [S1], Step, [2]
[Enter].
Selects step 2 to edit
14. Repeat steps 7 through 13.
Adds additional steps to the
subroutine
To Next Page
Loading...
