Express Two Scene Preset User Manual, v.3.1 223
15. Press [S1], Step, [6]
[Enter].
Selects step 6 to edit
16. Press [S8], Style, to select
a subroutine style. (You
may need to press [S7],
More Softkeys, first.)
Prompt reads:
Select style of subroutine command
(1 = Loop, 2 = Bounce,
3 = Jump to cue, 4 = Hold for go)
17. Press [3] [Enter].
Selects Jump to cue style for step 6
Prompt reads:
Select cue number
18. Press [8] [Enter].
Selects cue 8 for Jump to cue. When
subroutine reaches step 6, the
subroutine ends and runs cue 8.
Prompt reads:
Enter blocking status for jump to
cue (1=Blocking, 2=No blocking)
19. Press 2.
a
Specifies that the cue will not cause
blocking
20. Complete entering all cue
steps and style steps as
described above.
21. Press [Record], enter cue
number, and press [Enter]
to record subroutine cue.
a.
Blocking is the default.
To Next Page
Loading...
