Express Two Scene Preset User Manual, v.3.1 103
Recording modified cues
The difference between Record and Track is apparent when you modify a
cue or insert a new cue between two existing cues. Record and Track
produce different results.
Using Record
The following keys were pressed to release captured channels and play
back cue 1.
With cue 1 in a fader, channel 1 is modified to 50 percent. Because cue 1
is re-recorded with [Record], none of the subsequent cues are affected by
the procedure.
Following is an illustration of the use of [Record] when modifying cue 1.
Note that channel 1 is not affected in cues 2 and 3. Also note that when
you record a modified cue that is in a playback fader, the changes are
reflected in the fader. That is, when you release the channels you have
modified, they remain on stage.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50
Cue 2 FF FF
Cue 3 FF FF FF
Cue 4 25 FF FF FF
Cue 5 00 00 00 00
Keystrokes:
Actions:
1. Press [Stage] [Rel] [Rel].
Releases captured channels
Prompt reads:
Select channel numbers
2. Press [Cue] [1] [Go].
Plays back cue 1
3. Press [1] [At] [5][0].
Modifies channel 1
4. Press [Record].
Prompt reads:
To record cue, select number and
press ENTER
To cancel, press CLEAR
5. Press [Enter].
Records cue 1
To Next Page
Loading...
