Express Two Scene Preset User Manual, v.3.1 97
Updating a recorded cue
You need not play back the cue to update it. The following procedure
illustrates how to update any recorded cue.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [S8], Fixture, [1]
[Thru] [8], [Full].
Selects fixtures 1 through 8 and sets
their intensities to full
3. Set the pan and tilt levels.
a
a. Use your trackpad.
Sets the levels of the position
attributes for all selected fixtures
4. Press [S2], Update, [3].
Selects cue 3 to update
Prompt reads:
To update cue, select number and
press ENTER (TRACK + ENTER for
tracking) To cancel, press CLEAR
5. Press [Only] [S8], Fixture,
[6] and [7].
b
b. Optional step. If you don’t use Only, all non-zero channels are
included in the update.
Restricts the update to fixtures 6 and 7
Prompt reads:
Select fixture number(s)
To cancel, press CLEAR
6. Press [Enter].
c
c. If you want the update to track into subsequent cues, press
[Track] before pressing enter.
Updates cue 3
To Next Page
Loading...
