Express Two Scene Preset User Manual, v.3.1 109
If cue 5 is an allfade, the console records all unused channels at 00
percent. In the example below, an allfade enters 00 in channel 5, cue 5.
When you track channel 5 through the sequence, it won’t track through
the blackout cue.
To select the allfade type for cue 5, enter these keystrokes:
[Blind] [5] [Type] [2]Selects allfade fade type.
[Record] [Enter]Re-records cue.
Now when we track channel 5 through the sequence, cue 5 blocks the
track. The result is illustrated in Figure 7.
Chan 1 Chan 2 Chan 3 Chan 4 Chan 5
Cue 1 50 FF
Cue 1.1 50 50 FF
Cue 2 50 FF 00 FF
Cue 3 50 FF FF FF
Cue 4 25 FF FF FF FF
Cue 5 00 00 00 00 00
Figure 7
For more information on cue fade types, see Cue types, page 80.
To Next Page
Loading...
