Express Two Scene Preset User Manual, v.3.1 135
Updating a recorded group
You need not place a group on stage to update it. The following procedure
illustrates how to update any recorded group.
Keystrokes:
Action:
1. Press [Stage].
Selects Stage display mode
2. Press [5][0] [Thru] [7][5]
[At] [9] [Enter].
Selects channels and sets levels
3. Press [S2], Update,
[Group] [3].
Selects group 3 to update
Prompt reads:
To update group, select number
and press ENTER
To cancel, press CLEAR
4. To restrict channels in the
update, use Only here.
a
a. If not restricted with Only, all captured and selected channels
are included in the update.
Selects channels to update
Prompt reads:
Select channel numbers -
To cancel, press CLEAR
(Press 0 to reselect all non-zero
channels)
5. Press [Enter].
Updates group 3
To Next Page
Loading...
