Express Two Scene Preset User Manual, v.3.1 181
Replacing channel level
As a convenient editing technique, you may specify a particular level to
change for a channel or number of channels. After entering the cue
spreadsheet as explained earlier in this section, replace channel level as
follows.
Keystrokes: Actions:
1. Press [S1], Select Cue.
Prompt reads:
Select cue(s)
2. Press [5] [Enter].
Selects cue 5
Prompt reads:
Select channel(s)
3. Press [5] [Thru] [1][0] [S3],
Replace Level, [5][0].
Selects channels 5 through 10 at level
50 to change
Prompt reads:
Select level to replace and press
ENTER
4. Press [Enter].
Prompt reads:
Select new level and press ENTER
5. Press [Full] [Enter].
Changes all channels in the range 5
though 10 with level 50 to level full
To Next Page
Loading...
