Express Two Scene Preset User Manual, v.3.1 227
6. Press [5] [Enter].
Inserts a five second wait into the
macro
Prompt reads:
Select operation(s) for this macro –
press ENTER MACRO when done
(Wheels, trackpad and sliders are
not valid entries in macros)
7. Enter [Channel] [1] [Thru]
[1][0] [Full].
Sets channels 1 through 10 at Full
8. Press [Macro Wait].
Prompt reads:
Enter wait time
Press ENTER when done
9. Press [5] [Enter].
Inserts a five second wait into the
macro
Prompt reads:
Select operation(s) for this macro –
press ENTER MACRO when done
(Wheels, trackpad and sliders are
not valid entries in macros)
10. Enter [Channel] [1] [Thru]
[1][0] [At] [0] [Enter].
Sets channels 1 through 10 at zero
11. Press [Enter Macro].
Concludes macro recording
12. Press [M*] [7] [Enter].
Macro 7 runs. Channels 1 through 5
rise to 50 percent. After five seconds,
channels 1 through 10 rise to Full.
After five seconds, levels drop to zero
To Next Page
Loading...
