ETC Express 48/96 - Limited Warranty; Terms and Conditions

Express Two Scene Preset User Manual, v.3.1 345
Setup - System Settings (1), Output Config (2) and Clear (4)
System Settings (1) Output Configuration Clear Functions
1 Purge Flexi DMX512 Port Reset System
2 DMX512 Mode
3 Starting Dimmer
4 DMX512 Speed
5
6
7
8 Return>Setup Return>Setup Return>Setup
Setup - Print (5) and Options (6)
Print Functions Options ESP
1 Stop Printer Disable MIDI 9,600 Baud
2 Pause Printer ESP Baud Rate > ESP 14,400 Baud
3 19,200 Baud
4 28,800 Baud
5 38,400 Baud
6 57,600 Baud
7 115,200 Baud
8 Return>Setup Return>Setup Return>Options
Setup - Macro Editing (8)
Macro Editing Macro 2
1 Select Macro On Sub-Bump
2 Insert/Replace Off Sub-Bump
3 Delete Entry On Trigger
4 Off Trigger
5 Copy Macro
6 Delete Macro Macro Enter
7 More Softkeys>Macro 2 More Softkeys>Macro
8 Return>Setup Macro Wait
Setup - ETC Link Functions (9)
ETC Link Functions System Status (1) Rack Status (2)
1 Enable/Disable ETCLink Dimmer Double /
Normal Fire Mode
2 A Play Backup
3 B Record Backup
4 System Status
5 Dimmer Status Dimmer Status
6 Unset Dimmer Rack Status Select Rack
7 Set Dimmer
8 Return>Setup Return>ETC Link Return>ETC Link