Fibocom G510 - Page 103

G5/G6-Family AT Commands User Manual Page
103
of
243
+CMGR:
<stat>,<fo>,<ct>[,<pid>[,<mn>][,<da>][,<to
da>],<length><CR><LF><cdata>]
If text mode (+CMGF=1) command
execution is successful and CBM storage:
+CMGR:
<stat>,<sn>,<mid>,<dcs>,<page>,<pages
><CR><LF><data>
If text mode (+CMGF=1) command
execution is successful and
SMS-STATUS-REPORT:
+CMGR:
<stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<
dt>,<st>
If PDU mode (+CMGF=0) and command
execution is successful:
+CMGR:
<stat>[,<alpha>],<length><CR><LF><pdu
>
otherwise:
+CMS ERROR: <err>
The following table shows the +CMGR parameters.
<Parameter>
Description
<index>
1-352 Index in storage of the message. to be retrieved.
<stat>
Status of message in memory:
PDU
Text mode
Description
0
“REC
Received unread messages
1
“REC READ”
Received read messages
2
“STO
Stored unsent messages
3
“STO SENT”
Stored sent message
4
“ALL”
All messages
<alpha>
Alpha ID of message (not present).