Fibocom G510 - Page 105

G5/G6-Family AT Commands User Manual Page
105
of
243
Reference
Description
Length
<sca>
Service Center address:
1 BYTE: length (number of followed octets).
Mandatory
1 BYTE: <tosca> - value between
128-255
1, 3-12 BYTES
(When length is 1,
length BYTE = 0 )
<fo>
First Octet.
1 BYTE
<TP-OA>
Originating address formatted according to the formatting rules
of address fields.
2-12 BYTES
<TP-PID>
Protocol-Identifier. Values between 0-255.
1 BYTE
<TP-DCS>
Data Coding Scheme. Values between 0-255.
1 BYTE
<TP-SCTS>
The TP-Service-Center-Time-
Stamp field is given in semi-octet representation, and
represents the local time as described in GSM03.40
7 BYTE
<TP-UDL>
User data length
1 BYTE
<TP-UD>
User data
0-140 BYTES
Note: Any unused bits will be set to zero and shall be ignored by the receiving entity.
Bit/s
Reference
Description
0-1
Message-Type-Indicator
Parameter describing the message type.
0 0 SMS-DELIVER (in the direction SC to MS)
2
TP-More-Message-To-Send
Parameter indicating whether or not more messages is
waiting to the MS in the SC.
0 More messages are waiting for the MS in this SC
1 No more messages are waiting for the MS in this SC
5
TP-Status-Report-Indication
Parameter indicating if a status report is requested by the MS
0 A status report is not requested
1 A status report is requested
6
TP-User-Data-Header-Indicat
or
Parameter indicating whether or not a status report will be
returned to the SME.