Fibocom G510 - Page 112

G5/G6-Family AT Commands User Manual Page
112
of
243
rules of address fields.
<TP-PID>
Protocol-Identifier. Values between 0-255.
1 BYTE
<TP-DCS>
Data Coding Scheme. Values between 0-255.
1 BYTE
<TP-VP>
Validity Period. Depending on <fo>,
TP-Validity-Period-Format bits setting.
0, 1, 7 BYTE
<TP-UDL>
User data length
1 BYTE
<TP-UD>
User data
0-140 BYTES
<sca>
Service Center address:
1 BYTE: length (number of followed octets). Mandatory
1 BYTE: <tosca> - value between 128-255
1, 3-12 BYTES
(When length is 1,
length BYTE = 0)
<fo>
First Octet.
1 BYTE
<TP-MR>
Message Reference. An integer representation of a
reference number of the SM submitted to the SC by the
MS.
Values between 0-255.
1 BYTE
<TP-PID>
Protocol-Identifier. Values between 0-255.
1 BYTE
<TP-CT>
Command Type
1 BYTE
<TP-MN>
Message Number
1 BYTE
<TP-DA>
Destination address formatted according to the formatting
rules of address fields.
2-12 BYTES
<TP-CDL>
Command data length
1 BYTE
<TP-CD>
Command data
0-156 BYTES
Bit/s
Reference
Description
0-1
Message-Type-Indica
tor
Parameter describing the message type.
0 1 SMS-SUBMIT (in the direction MS to SC)
2
TP-Reject-Duplicates
Parameter indicating whether or not the SC shall accept an
SMS-SUBMIT for an SM still held in the SC which has the same MR
and the same DA as a previously submitted SM from the same OA.
0 Instruct the SC to accept an SMS-SUBMIT as mention above
1 Instruct the SC to reject SMS-SUBMIT as mention above. In