Fibocom G510 - Page 114

G5/G6-Family AT Commands User Manual Page
114
of
243
0 The TP-UD field contains only the short message
1 The beginning of the TP-UD field contains a Header in
addition to the short message
Note: Any unused bits will be set to 0. If AT+CSCS=”HEX” , the DATA saved by CMGW is not that was
entered.
Example:
AT+CMGF=1
OK
AT+CMGW="5124335432"
>This is the message body <CTRL+Z> //<CTRL+Z> ends the prompt text mode and returns to
regular AT command mode
+CMGW: 126
OK
AT+CMGW
> TEST <CTRL+Z>
+CMGW: 195
OK
AT+CMGF=0
OK
AT+CMGW=24
>079179521201009511FF0B917962543940F20008001400410042004300440045 <CTRL+Z>
+CMGW: 128
OK
AT+CMGR=128
+CMGR: 2,,24
079179521201009511FF0B917962543940F20008001400410042004300440045
OK
AT+CMGF=1
OK
AT+CSDH=1
OK
AT+CMGR=128
+CMGR: "STO UNSENT", "+97264593042",,145,17,0,8,0,"+972521100059",145,5
00410042004300440045
OK