Fibocom G510 - Page 127

G5/G6-Family AT Commands User Manual Page
127
of
243
The following table shows the +CLCK parameters.
<Parameter>
Description
<fac>
SC
SIM Card PIN setting
<mode> 0 Disable PIN
1 Enable PIN
FD
SIM Fixed Dialing memory setting
<mode> 0 Disable fixed dialing feature
1 Enable fixed dialing feature
<passwd>
String type, 4-8 character password
<mode>
0
Unlock
1
Lock
2
Query status (<passwd> does not apply)
Note: Query mode return only the active <fac>. In case no <fac> is
active the query will return the default (7).
<class>
Sum of integers, each representing a class of information <class>. Only
applies to call barring related facilities. The default value is 1.
1 Voice (telephony)
8 SMS (Short Message Services)
<status>
0 Inactive
1 Active
Example:
AT+CLCK=?
+CLCK: ("SC","FD")
OK
AT+CLCK="SC",2
+CLCK: 0
OK
AT+CLCK="SC",1
+CME ERROR: operation not allowed
AT+CLCK="SC",1,"incorrect password
+CME ERROR: incorrect password