Fibocom G510 - Page 224

AT Commands User Manual Page
224
of
243
P><CR><LF>
+MSDNS:
3,<Primary_DNS_server_IP>,<Secondary_DNS_server_I
P><CR><LF>
+MSDNS:
4,<Primary_DNS_server_IP>,<Secondary_DNS_server_I
P><CR><LF>
<CR><LF>
OK
Test
AT+MSDNS=?
+MSDNS: (List of supported <Socket_id>s),(<IP>),(<IP>)
OK
The following table shows the +MSDNS parameters.
<Parameter>
Description
<Socket_ID>
A unique number that identifies a connection (provided by the
terminal application).
0 - Invalid socket number
1,2,3,4 - Valid socket number
5 - Valid socket number dedicated to +MPING.
<Primary_DNS_server_IP>,<Sec
ondary_DNS_server_IP>
IP of the destination site in the format "AAA.BBB.CCC.DDD". The
range of each octant is 0-255. The value can be written in 1, 2, or 3
digits.
Example:
AT+MSDNS=?
+MSDNS: (1-5),(<IP>),(<IP>)
OK
AT+MSDNS? // read when MIPCALL is disconnected
+MSDNS: 1,"0.0.0.0","0.0.0.0"
+MSDNS: 2,"0.0.0.0","0.0.0.0"
+MSDNS: 3,"0.0.0.0","0.0.0.0"
+MSDNS: 4,"0.0.0.0","0.0.0.0"