Fibocom G510 - Page 33

G5/G6-Family AT Commands User Manual Page
33
of
243
• Unsuccessful UNBLOCK CHV verification, at least
one attempt left.
• Authentication failed.
152
8
In contradiction with CHV status.
152
16
In contradiction with invalidation status.
152
64
• Unsuccessful CHV verification, no attempt left.
• Unsuccessful UNBLOCK CHV verification, no
attempt left.
• CHV blocked.
• UNBLOCK CHV blocked.
<sw
1>
<sw
2>
Error Description
152
80
Increase cannot be performed, Max value reached.
103
XX
Incorrect parameter P3
(Note: 'XX' gives the correct length or states that no
additional information is given ('XX' = '00').
107
XX
Incorrect parameter P1 or P2.
109
XX
Unknown instruction code given in the command.
110
XX
Wrong instruction class given in the command.
111
XX
Technical problem with no diagnostic given.
<response>
Response of a successful completion of the command previously issued
(hexadecimal character uppercase format). STATUS and GET RESPONSE
return data, which gives information about the current elementary data
file_id. This information includes the type of file and its size (refer to GSM
11.11). After READ BINARY or READ RECORD command the requested
data will be returned. <response> is not returned after a successful
UPDATE BINARY or UPDATE RECORD command.
Example:
AT+CRSM=176,28478,0,0,20