Fibocom G510 - Page 47

G5/G6-Family AT Commands User Manual Page
47
of
243
The default value is 0.
<m>
Shows the subscriber CLIP service status in the network:
0 CLIP not provisioned
1 CLIP provisioned
2 Unknown (for example, no network and so on)
<"number">
Calling line number. The number format is specified by <type>.
<type>
Type of address octet in integer format:
145 Default when the dialing string includes the international access
code character "+".
161 Default when making a local call.
129 Type of number is unknown (usually the output when the number
itself is unknown).
<subaddr>
NULL, field not used (String type subaddress of format specified by
<satype>)
<satype>
Field not used. Value is always 128 (unknown) - type of sub address octet in
integer format.
<"alpha">
Name of the calling party (if provided by the network or if the number is found
in the Module phone books).
<CLI validity>
The Validity of the Calling Line Identity presentation:
0 CLI valid.
1 CLI has been withheld by the originator.
2CLI is not available due to networking problems or limitations of the
originating network.
Example:
AT+CLIP=?
+CLIP: (0,1)//CLI presentation is disabled by the G5xx/G6xx (0) and is enabled by the network
(1)
OK
AT+CLIP=1
OK