Function Reference
Analog Stereo/Dual Sound
5
5-41
The Analog Stereo/Dual Sound for the different TV systems is selected:
•
using the
Sound System
popup
menu.
•
for pre-defined countries:
using the
Country
popup menu.
The different 54200 operating modes for the Analog Stereo/Dual Sound are shown in
Table 5-17.
For operating Analog Stereo Sound, see Chapter 4, Section Sound Settings.
The instrument allows external modulation from a stereo tuner/amplifier or a tape or cas-
sette recorder with 54200 as the RF modulator.
Audio and Sound Outputs
The internal generated audio signals are available at the
AUDIO OUT
and the
EURO AV
OUT
connectors (rear side)
.
The audio signals are applied to:
•
AUDIO OUT L
for channel 1 (S1 left).
•
AUDIO OUT R
for channel 2 (S2 right).
For details of the EURO AV OUT connector, see Chapter 3, Table 3-2.
The FM modulated sound carrier signal is available at the
SOUND IF OUT
connector (rear
side).
To Next Page
Loading...