Fluke 54200 - Feedthrough Connection; IEEE-488 and RS-232 Interface; IEEE-488 Interface; RS-232 Interface

54200
Users Manual
7-20
Impedance 75
Ω
Coupling DC
Blanking level 0 V
Offset
±
200 mV
Connector Y/ C
R
/ C
B
OUT, BNC rear
Max. external voltage
±
9 V
Feedthrough Connection
Connection between rear and front, BNC connectors,
not recommended for vision carrier.
TO REAR connected with TO FRONT
TO FRONT connected with TO REAR
Connector TO REAR, BNC front
TO FRONT, BNC rear
IEEE-488 and RS-232 Interface
IEEE-488 Interface
Allows selection and control of all functions
Instrument command set see Chapter 6, Remote Control
Reference ANSI/IEEE Std. 488-1987
Compatibility IEEE-488.2-1987
Interface functions AH1, SH1, L4, T6, RL1, SR1, DC1, E2
Connector Amphenol rear (RFI/EMI shielded)
RS-232 Interface
Allows selection and control of all functions
Instrument command set see Chapter 6, Remote Control
Baud rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, or 19200
Data bits 7 or 8
Stop bits 1,
2 for 110 Baud
Parity check Odd, even or none (none for 8 data bits only)
Handshake Software, hardware
Connector 9 pin D-type rear (male)