Fluke 54200 - Sound; Audio and Euro AV; BTSC MPX and FM Stereo Pilot; Outputs

54200
Users Manual
7-10
Sound
Outputs
Sound Carrier
Voltage (Vpp into 50
Ω
) 142 mV for mono carrier and system B, G
200 mV for mono carrier and system D, I, K, K1, L, M, N
63.2 mV for stereo and NICAM B, G, D, I, K carrier
(sound carrier 2)
28.3 mV for NICAM L carrier (sound carrier 2)
Setting range for mono carrier
(depends on sound carrier 1 level setting):
112.5 mV to 356 mV at -15 dBc to -5 dBc sound carrier level
Resolution 1 dB
Setting range for stereo and NICAM carrier:
63.2 mV at -20 dBc sound carrier level
35.6 mV at -25 dBc sound carrier level
28.3 mV at -27 dBc sound carrier level
Tolerance 2 dB
Impedance 50
Ω
Connector SOUND IF OUT, BNC rear
Audio and Euro AV
Voltage 500 mV,
(Vrms in open circuit) 278 mV at 12 kHz intern in NICAM mode
Tolerance 5%
Impedance 600
Ω
Connector AUDIO OUT, Cinch rear,
EURO AV OUT, EURO AV connector rear
BTSC MPX and FM Stereo Pilot
Impedance 600
Ω
Connector MTS/PILOT OUT, BNC rear
Voltage (Vrms open circuit) Nominal
BTSC mode BTSC baseband signal
Main channel 500 mV,
at 13.5 kHz deviation
Pilot carrier 185 mV,
equivalent to ±5 kHz deviation of sound carrier
SAP carrier 555 mV,
equivalent to ±15 kHz deviation of sound carrier
Tolerance 5%