How to Use the Instrument
Operating via Keyboard
4
4-35
Storing and Recalling of Settings
Ninety-nine complete instrument settings can be stored in the non-volatile memory
registers 1 to 99.
When you switch off the instrument, the current settings are automatically saved
separately.
After power on, the instrument runs through its start routine, and then goes to the mode
that was last set.
Storing of Instrument Settings
To store your preferred settings, set the instrument to the mode you want to save, for
example:
Figure 4-57. Settings to be Stored
•
Press the
STORE
key.
•
A popup menu appears, showing the last used memory register.
Figure 4-58. Last used Memory Register
To Next Page
Loading...