How to Use the Instrument
Operating via Keyboard
4
4-39
Digital Data and Text
Programmed data and text for PDC, VPS, and WSS are stored in separate memories, see
Chapter 5.
If you store the instrument settings,
you automatically store the selected mode into the
memory register
for the instrument settings, for example,
PDC Data Set 4
on
,
not the
data itself.
If you recall a setting, you also recall the stored PDC, VPS, or WSS mode. The
instrument calls up, for example,
PDC Data Set 4 on
. For the PDC data set contents, the
instrument uses the last stored data in the separate PDC memory.
That means, if you program a certain contents for
PDC Data Set 4
, store the instrument
settings in register 30, program a different contents for
PDC Data Set 4
, store the
instrument settings in register 35, you will get the same PDC data set 4 contents (the last
stored) when calling up memory register 30 or register 35.
To Next Page
Loading...