Fluke 54200 - General Specifications; Environmental Conditions

Specifications
General Specifications
7
7-21
General Specifications
Environmental Conditions
Environment Laboratory equipment Class 5 (MIL-T-28800D)
Warming-up time 30 min
Temperature +22 to +24 °C for reference temperature
0 to +50
°
C for operating
-20 to +71
°
C for non-operating
Humidity Relative humidity (MIL-T-28800D)
Operating (no condensation)
+0
°
C to 10
°
C not controlled
+11
°
C to 30
°
C 95%
±
5%
+31
°
C to 40
°
C 75%
±
5%
+41
°
C to 50
°
C 45%
±
5%
Non-operating 5% to 95%
Altitude (MIL-T-28800D)
Operating 3,050 m (10,000 ft)
Non-operating 4,570 m (15,000 ft)
Vibration (MIL-T-28800D)
Operating 0.33 mm
p-p
at 5 Hz to 55 Hz (2 g at 55 Hz)
Non-operating 0.70 mm
p-p
at 10 Hz to 55 Hz,
5 g at 55 Hz to 150 Hz
Shock (MIL-T-28800D)
Operating,
Functional, 18 shocks/20 g
Transport 1 corner / 6 surfaces,
drop height 0.67 m
Safety EN 61010-1 +/A2, Class I
IEC 1010-1 +A1 +A2, Class I
CAN/CSA-C22.2 No 1010.1, Class I
EMC emission EN 55011, Group 1, Class B
VDE 0875, Part 11, Group 1, Class B
CISPR 11, Group 1, Class B
FCC Part 15J Class A
EMC immunity EN 50082-1 (Generic)
RF EM field IEC 801-3/84 (27-500 MHz, 3V/m)
Electrostatic discharge IEC 801-2/84 (
±
8 kV air discharge)
Fast transient IEC 801-4/88 (0.5 kV signal/ control lines, 1 kV mains)
Additional:
RF EM field ENV 50140 / 93 (80-1000 MHz, 3V/m)
Electrostatic discharge IEC 1000-4-2 / 95 (
±
8 kV air discharge),
(
±
4 kV contact discharge)
Magnetic Field IEC 1000-4-8 /93 (50 Hz, 3 A/m)
Recalibration interval 12 months
Reliability MTBF = 20,000 hours