54200
Users Manual
8-28
NICAM L, Conventional Analog AM Sound
Procedure:
•
Same settings as above.
•
Select with the
é
or
ê
softkey (F1 or F2) the label
Off
below
AM Mono Int
.
•
Press the
edit
softkey (F3) and select
0.5 kHz
in the popup menu.
•
Press the
enter
softkey (F5) to confirm the setting.
The display shows:
Figure 8-26. Analog AM Sound, NICAM L
•
Select with the
é
or
ê
softkey (F1 or F2) the label
-27 dBc
in the lower row (sound
carrier level of channel 2).
•
Press the
edit
softkey (F3) and select
Off
in the popup menu.
•
Press the
enter
softkey (F5) to confirm your setting.
Test Result Requirement:
The digital NICAM L sound is not available (sound carrier level CH 2 off).
The TV does not show a NICAM sound indication.
The TV reproduces a conventional sound with 0.5 kHz modulation in both channels.
Analog AM Sound (AM L)
Procedure:
•
Load the default settings of the generator with
RECALL 0
.
•
Press the
standard
softkey (F1) in the
main
menu.
•
Press the
edit
softkey (F3) and select country
France
in the popup menu with the
Pre-defined Country List to set the instrument to
SECAM L
.
•
Select with the
é
or
ê
softkey (F1 or F2)
NICAM L
.
•
Press the
edit
softkey (F3) and select
AM L
in the popup menu.
•
Press the
enter
softkey (F5) to confirm your setting and to return the
main
menu.
•
Select the
sound
submenu with the
sound
softkey (F3).
To Next Page
Loading...