[SOURce:]FUNCtion:NOISe:SLENgth
<integer_numeric_value>
Sending this program message sets the sequence length for the analog and digital
noise, and signal pulse noise functions. The following sequence lengths can be
entered:
63 (Default value),
127, 255,
511, 1023,
2047, 4095,
8191,
16383
32767, 65535
131071 (option 002 only)
[SOURce:]FUNCtion:NOISe:NTEeth
<numeric_value>
Sending tbis program message sets the number
of
"teeth" for the comb frequency
count for the Comb function. The value is between 3 and 256 with 100 being the
default.
[SOURce:]FUNCtion:NOISe:FREQuency:START
<real
numeric
value>
- -
Sending this program message sets the start frequency for the noise band for the
analog noise, signal plus noise function, and signal plus comb function. The start
frequency can be programmed between 0.0 Hz and 10 MHz with 1 MHz as the
default frequency.
[SOURce:]FUNCtion:NOISe:FREQuency:STOP
<real
numeric
value>
- -
Sending this program message sets the stop frequency for the noise band for the
analog noise, signal plus noise function, and signal plus comb function. The stop
frequency can be programmed between 0.0 Hz and 10 MHz with 2
MHz
as the
default frequency.
[SOURce:]FUNCtion:NOISe:SIGNal:NAME
<shape_name>
Sending tbis program message selects the signal waveform for the signal plus noise
function, and signal plus comb function.
The following function shapes are available:
•
De
An unvarying signal with respect to time.
• NHSine Negative haversine.
• NRAMp Negative ramp.
• PHSine Positive haversine.
• PRAMp Positive ramp.
• PRNoise Periodic random noise.
•
SINe
(SIN X)/X
• SINusoid A sinusoidal signal.
• SQUare A square wave signal.
• TRIangle A triangle wave signal.
• Trace Name Enter the name
of
any Arb waveform.
Remote Operation 5-37
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
