276 Upgrade and Maintenance Manual TX140 S1
Expansion cards and backup units
9.4 Additional tasks
This section provides additional expansion card related information on how to
install slot brackets and SFP+ transceiver modules.
I For further instructions regarding controller settings, please refer to the
accompanying documentation.
9.4.1 Mounting expansion card slot brackets
This section provides general instructions on mounting slot brackets as well as
specific instructions for the following network adapters:
● "Network adapter D2735" on page 278
● "Network adapter D2745" on page 280
● "Network adapter D2755" on page 282
9.4.1.1 Required tools
● Preliminary and concluding steps: tool-less
● Mounting slot brackets:
– Phillips PH2 / (+) No. 2 screw driver
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
To Next Page
Loading...
