Fujitsu PRIMERGY TX140 S1 - Replacing the Intrusion Switch Cable; Required Tools

560 Upgrade and Maintenance Manual TX140 S1
Cabling
16.9 Replacing the intrusion switch cable
Figure 389: Intrusion switch cable T26139-Y3736-V302
16.9.1 Required tools
● Preliminary and concluding steps:
– Phillips PH2 / (+) No. 2 screw driver
● Replacing the intrusion switch cable:
– Phillips PH2 / (+) No. 2 screw driver
Field Replaceable Units (FRU)
Average task duration: 10 minutes