TX140 S1 Upgrade and Maintenance Manual 473
15 Converting a tower server to a
rack server
This chapter provides information on how to convert a tower server to a rack
model.
Safety notes
V CAUTION!
● For further information, please refer to chapter "Important
information" on page 41.
15.1 Required tools
● Preliminary and concluding steps: tool-less
● Converting the server model:
– Phillips PH2 / (+) No. 2 screw driver
– Slotted screw driver
Field Replaceable Units (FRU)
Average task duration: 20 minutes
To Next Page
Loading...
