400 Upgrade and Maintenance Manual TX140 S1
Front panel and external connectors
Ê Pull out the ID card and open the front cover as described in section
"Removing the rack front cover" on page 69 (rack server) or "Removing the
front cover" on page 74 (tower server).
Ê Remove the fan module as described in section "Removing the fan module"
on page 208.
13.2.2.3 Removing the front LAN board
Figure 250: Disconnecting the front LAN board
Ê Disconnect the front LAN board from the system board:
Press in on the locking latch on the front LAN board holder (1) and pull the
front LAN board out of its socket (2).