EasyManua.ls Logo

Fujitsu PRIMERGY TX140 S1 - 11 Processors

Fujitsu PRIMERGY TX140 S1
588 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TX140 S1 Upgrade and Maintenance Manual 307
11 Processors
This section provides information on how to replace the processor and
processor heat sink.
Safety notes
V CAUTION!
Do not install unsupported processors. For further information on
supported processors, refer to section "Basic procedure" on
page 308.
Circuit boards and soldered parts of internal options are exposed and
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
Do not touch the circuitry on boards or soldered parts. Hold circuit
boards by their metallic areas or edges.
When removing or installing the processor, be careful not to touch or
bend the spring contacts on the processor socket.
Never touch the underside of the processor. Even minor soiling such
as grease from the skin can impair the processor’s operation or
destroy the processor.
For further information, please refer to chapter "Important
information" on page 41.
In this chapter
"Upgrading or replacing the processor" on page 308
"Replacing the processor heat sink" on page 324

Table of Contents

Other manuals for Fujitsu PRIMERGY TX140 S1

Related product manuals