TX140 S1 Upgrade and Maintenance Manual 581
Appendix
Depending on BIOS settings, the shared LAN connector may also be used as
a management LAN connector. For further information, please refer to the
"D3049 BIOS Setup Utility for PRIMERGY TX140 S1 / TX120 S3 Reference
Manual".
The serial connector COM1 can be used as default interface or to communicate
with the iRMC S3.
I The chipset offers two integrated USB 2.0 Rate Matching Hubs (RMHs).
that enable lower power requirements and manages the transition of the
communication data rate from the high speed of the host controller to the
lower speed of USB full speed / low speed devices.
17.3.1.5 I/O panel indicators
Figure 406: I/O panel indicators
4 USB connectors
5 Video connector (VGA)
6 Serial connector COM1
No. Description
To Next Page
Loading...
Need help?
General