EasyManua.ls Logo

Fujitsu PRIMERGY TX140 S2 - Page 168

Fujitsu PRIMERGY TX140 S2
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
168 Upgrade and Maintenance Manual
TX140 S2
Expansion cards and backup units
Figure 86: Assembled network adapter D3045
Example USB 3.0 interface card D3305
V CAUTION!
The USB 3.0 interface card D3305 comes pre-assembled with a full
height slot bracket. When replacing the slot bracket, ensure to use the
original M3 x 5 mm screws. Standard M3 screws may damage onboard
components.
Figure 87: Mounting the PCI slot bracket (A)
Ê Place the controller on the mounting tabs on the slot bracket.

Table of Contents

Other manuals for Fujitsu PRIMERGY TX140 S2

Related product manuals