Garmin CIRRUS PERSPECTIVE TOUCH+ - Procedures

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 81
Flight Management
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Changing a flight plan comment for the standby or stored flight plan:
1) For the standby flight plan: From MFW Home, touch Flight Plan > Standby Flight Plan
> Flight Plan Options.
Or:
For the stored flight plan:
a) From MFW Home, touch Flight Plan > Flight Plan Options.
b) Touch the Flight Plan Catalog Button to display the 'Flight Plan Catalog' Screen.
c) Scroll the list if needed and touch a Stored Flight Plan Button to display the 'Catalog
Options' Window.
2) Touch the Rename Button to display the keypad.
3) Use the keypad to select the comment.
4) Touch the Enter Button to accept the comment, and return to the flight plan.
PROCEDURES
Viewing available procedures at an airport:
1) From MFW Home, touch Waypoint Info > Airport.
2) If necessary, touch the Airport Selection Button to display the keypad and use it to select
the airport.
3) Touch Proc Tab to display the 'Airport Procedures' Screen.
4) Scroll the list if necessary and touch a Procedure Selection Button. The procedure
selection screen is displayed on the Touchscreen Controller for the selected procedure.
5) Touch the Preview Button, then the Show on Map Button to show the procedure on the
active display pane or touch the Show Chart Button to show the chart instead.
6) Touch the Cancel Button to return to the 'Airport Procedures' Screen to view another
procedure.
7) Repeat Steps 4 through 6 as necessary.
Loading a procedure into the active flight plan from the 'Airport Information' Screen:
1) From MFW Home, touch Waypoint Info > Airport.
2) If necessary, touch the Airport Selection Button to display the keypad and use it to select
the airport.
3) Touch the Proc Tab to display the 'Airport Procedures' Screen.
4) Scroll the list, if necessary, and touch a Procedure Selection Button. The procedure
selection screen is displayed on the Touchscreen Controller for the selected procedure.
5) Touch the Preview Button, then the Show on Map Button to show the preview of
the procedure on the active display pane or touch the Show Chart Button to show the
procedure chart instead.