Garmin CIRRUS PERSPECTIVE TOUCH+ - Mode S Transponders

Cockpit Reference Guide for the Cirrus SR2x with Perspective Touch+ by Garmin
190-02954-01 Rev. A 29
Audio and CNS
Flight
Instruments EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazard
Avoidance AFCS
Additional
Features Annun/Alerts Appendix Index
Flight
Instruments EAS
Audio and
CNS
Flight
Management
Hazard
Avoidance AFCS
Additional
Features
Abnormal
Operation Annun/Alerts Appendix Index
Selecting a DME mode:
1) From NAV/COM Home, touch the Audio & Radios Button to display the ‘Audio & Radios’
Screen.
2) Scroll the list to find the DME Button.
3) Touch the DME Mode Control Button to display the ‘DME’ Screen.
4) Touch the NAV1, NAV2, or HOLD Button to select desired DME mode. DME information
will be displayed on the PFD in the Active NAV Source/Frequency Box. An ‘H’ next to the
frequency indicates DME Hold mode.
MODE S TRANSPONDERS
Selecting transponder mode:
1) From NAV/COM Home, touch the Transponder Code/Mode Button to display the
‘Transponder’ Screen.
2) Touch desired Mode Selection Button to activate the desired transponder mode.
Entering a transponder code with the keypad:
1) From NAV/COM Home, touch the Transponder Code/Mode Button.
2) Use the keypad to select the desired code.
3) Touch the Enter Button to enter the new code.
Entering a transponder code with the knobs:
1) From NAV/COM Home, touch the Transponder Code/Mode Button.
2) Turn the large upper knob one click in any direction to select the first digit of the existing
code.
3) Turn the small upper knob to enter the desired first digit.
4) Turn the large upper knob clockwise to move the cursor to the next digit.
5) Turn the small upper knob to enter the next digit and repeat steps 4 and 5 until complete.
6) Touch the Enter Button or push the small upper knob to enter the new code. Touching
the Cancel Button before code entry is complete cancels code entry and restores the
previous code.
Entering the VFR code with the VFR Button:
1) From NAV/COM Home, touch the Transponder Code/Mode Button.
2) Touch the VFR Button.
3) Touch the Enter Button or push the small upper knob to enter the new code. Pressing
the Cancel Button before code entry is complete cancels code entry and restores the
previous code.